Fingerprint in silver: the wax kit

You take the print at home, with the wax kit we send you at no cost. From the mold, we cast the piece in S925 silver: it is not engraved, it takes shape with every line of your finger.
The piece
| Piece | Fingerprint Necklace |
| Metal | S925 silver · gold-plated on the gold one |
| Prints | One or two, side by side |
| Lead time | 3 to 4 weeks in all |
What comes in the kit

- Three wax molds
- A candle, to soften the wax
- A bag and the return label
- This guide, inside the box
How to order
-
Choose the fingerprints. While personalizing, choose one print or two, side by side on the piece. The kit is already included, at no cost.
-
Read the collection guide. “How to take the print?” opens this step-by-step guide.
-
Review and order. At the end you see the kit included, when it arrives and the stages up to the piece. You send nothing when ordering.
How to take the print Before you start: work with clean, dry hands, keep the candle away from children and let the mold harden completely before sealing it in the bag.
- Warm the wax. Bring it carefully near the flame, on a flat, heat-resistant surface.
- Let it soften. No need to melt it: it only needs to be pliable.
- Press your finger. One firm, centered print, without sliding. With two prints, side by side on the same face.
- Check the result. Let it cool and check the lines are well defined. If they are not, use another mold.
- Send us the mold. In the bag, with the kit’s return label: drop it off at a point of the carrier named on the label.
Lead times. The kit ships in 1 to 2 business days. Making begins when the mold reaches the atelier, and the piece is made in 8 to 10 business days. Allow 3 to 4 weeks in all. If the piece is for a date, tell us in the letter message and we will adjust what we can.
Related articles
Ainda precisa de ajuda
Não encontra o que procura? Contacte-nos e vamos resolver