How it works
Choose what stays.
We make it last.
Four ways to keep a memory in a piece. Each one is made by hand in our atelier, once, for you.
6–10 business daysMicrophotography
- Choose the photo. One face, centred, the original file.
- We reduce it to millimetres and place it by hand behind the lens.
- Look through the lens: the whole photo. Water and time do not erase it.
Limits ·One photo per window · JPG, PNG or HEIC up to 20 MB · if the file does not work, we write to you
6–10 business daysEngraving
- Choose a word, a place, a drawing or a fingerprint from a photo.
- We laser-engrave it, in steel or S925 silver, exactly as you wrote it.
- The back can take a second line (+€3.00).
Limits ·Up to 25 characters · script, serif or sans serif · accents and ∞ ♡ ✦
6–10 business daysStar map
- Tell us a date, a time and a place.
- We draw the sky exactly as it was that night.
- We engrave it on the piece, in our atelier.
Limits ·No automatic preview of the star map on the piece · seeing the map before we engrave it is an extra (€3.90)
3–4 weeks in totalFingerprint
- We send you a wax kit for the mould, at no cost.
- Press your finger into the wax and send the mould back to us, postage paid.
- We cast it in S925 silver. Made to your measure, once.
Limits ·One print or two, depending on the piece · the kit ships in 1–2 business days · the piece is made in 8–10 business days after the mould arrives
Choosing the photograph
What you give us is what stays.
The photograph is reduced to a few millimetres. Three things decide how it looks through the lens.
Yes — One face, or one subject, centredOne face, centred
Avoid — A face at the edge gets cut by the round windowFace at the edge
Yes — Light from the frontLight from the front
Avoid — Backlit, or heavy shadows on the faceBacklit or in shadow
Yes — The original file from your cameraThe original file
Avoid — Screenshots and forwarded images lose detailScreenshot or forward
- ✓ Is the face centred?Face centred
- ✓ Is it well lit?Well lit
- ✓ Is it sharp?Sharp
- ✓ Is it the original file?Original file
If something in the file won’t work, we write to you before we make the piece. Choosing well now avoids that wait.
You do it while personalising the piece, on your phone or computer. It takes less than a minute and you can repeat it as often as you like.
-
Choose the photo
In the “Photo” step, tap “Choose a photograph” and pick it from your gallery, or take it with the camera. JPG, PNG or HEIC, up to 20 MB.
-
See it in the window
The photo appears inside a circle: it is the window of the piece, and what is inside it is what is seen through the lens. If it looks right, tap “Add”.
-
Adjust the crop
Tap the crop symbol below the photo. Drag the corners to zoom in and the square to centre the face. When you are done, tap “Apply” and “Add”.
-
Confirm or change
Back on the piece, you see the photo as it will be. You can change it, adjust the crop again or let the atelier fine-tune the framing for you.
How the map is made
The sky that night, just as it was.
A star map is the sky above a place, at one moment. It is not a random drawing: every star stays where it was.
How it is made
- Tell us when and where The date, the hour if you know it, and the place. That is all we need.
- We chart the sky of that night We calculate where each star stood above that place, at that moment, and join the constellations.
- We engrave it on the piece By laser, in our atelier in Portugal. It ships in its box, with no price inside.
What we need from you
- Date
- Required
- Hour
- Optional · without it, the sky at 10 pm
- Place
- A city is enough
- See the sky
- As you personalise · the charted map, the design alone
The piece
- Piece
- Necklace or bracelet
- Metal
- Stainless steel or S925 silver · gold or silver
- Made in
- 6–10 business days
- Warranty
- 5 years on steel · 2 years on silver
There is no automatic preview of the star map on the piece. Add the Design Review from the extras: we send you an image of the map, and nothing is engraved without your yes.
You do it while personalising the piece. You tell us the place and the night and see the sky drawn right away, before ordering.
-
Tell us the place and night
In the “Personalise” step, write the place and pick it from the suggestions; a city is enough. Then enter the date of that night.
-
Add the time, if you know it
The time is optional: without it, we draw the sky late in the evening; with it, the map is exact. The sky appears on its own.
-
See the sky of that night
The map appears drawn, just as it will be engraved. If you change the place, the date or the time, the sky is drawn again.
-
Review before buying
At the end, “See” opens the map once more; “Edit” takes you back to change the place or the night, as often as you like.
Ways to engrave
A word, a place, a line, a print.
We laser-engrave, on steel or S925 silver, exactly what you give us. Choose one of the four ways as you personalise; the back can carry a second line.
-
Word or message
Up to 25 characters, in the lettering you choose.
-
Coordinates
A place, in two lines.
-
Drawing
Traced by hand from your drawing.
-
Fingerprint
Kit included, at no cost.
Word or message
Your words.
A name, a date, a line only the two of you understand. We engrave it exactly as you type it, capitals included.
How it works
- Type the text As you personalise, up to 25 characters.
- Choose the lettering Script, Serif or Sans serif. The preview changes as you type.
- We laser-engrave it In our atelier, in 6–10 business days.
The essentials
- Characters
- Up to 25
- Lettering
- Script, Serif or Sans serif
- Symbols
- Accents and ∞ ♡ ✦
- Back
- Optional · up to 20 characters (+€3.00)
You do it while personalising the piece. You see the text in the chosen lettering before confirming it.
-
Choose the form
While personalising, tap “Word or message” and then “Continue”. You can go back and choose another form whenever you like.
-
Write and pick the lettering
Write the text, up to 25 characters, and choose between Script, Serif and Sans serif. The preview shows it as it will be engraved.
-
Add the back
If you want a second line on the back, switch on “Back engraving” and write up to 20 characters. It is an extra, with the price in view.
-
Review before buying
At the end you see the text and lettering exactly as they go to the atelier. Check capitals, accents and dates; “Edit” still lets you change everything.
Coordinates
The place.
Where you met. Where someone said yes. Where a life began. We engrave the coordinates of that spot, in two lines.
How it works
- Type the place City, address or name of the spot; pick from the suggestions.
- Set the point on the map Drag the point, or tap the map, to the exact spot.
- We engrave the coordinates In two lines, as you see them in the preview.
The essentials
- Format
- Two lines: latitude and longitude
- We need
- A place, nothing more
- Questions
- We check with you before engraving
- Back
- Optional · up to 20 characters (+€3.00)
You do it while personalising the piece. You write the place, set the point on the map and see the coordinates as they will be engraved.
-
Choose the form
While personalising, tap “Coordinates” and then “Continue”. You can go back and choose another form whenever you like.
-
Write the place
Write a city, an address or the name of the spot and pick one of the suggestions that appear below the field.
-
Set the point
The map opens on that place. Drag the point, or tap the map, to the exact spot. Below it you see the coordinates, on two lines.
-
Review before buying
At the end you see the coordinates exactly as they go to the atelier. If that is not the spot, tap “Edit” and set the point again.
Drawing
The drawing.
A child’s drawing, a signature, a single line. We trace the line by hand and engrave it.
How it works
- Photograph the drawing Dark pen on white paper, from above, in daylight.
- Add it as you personalise We crop it and fit it to the plate. You can also email it after purchase.
- We trace the line by hand And laser-engrave it. The finest lines are simplified.
The essentials
- File
- JPG or PNG, up to 20 MB
- Per plate
- One drawing
- Line clean-up
- Optional · the drawing stays the same
- Back
- Optional · up to 20 characters (+€3.00)
You do it while personalising the piece, with a photograph of the drawing. We trace the line by hand before engraving.
-
Choose the form
While personalising, tap “Drawing” and then “Continue”. You can go back and choose another form whenever you like.
-
Photograph the drawing
Tap “Choose the drawing” and pick it from your gallery, or photograph it on the spot: dark pen on white paper, from above, in daylight.
-
Frame it
The drawing appears in the shape of the piece. If needed, tap the crop symbol and drag the corners to frame it; then tap “Add”.
-
Confirm or change
Back on the piece, you see the cropped drawing. You can change it, adjust the crop or ask the atelier to clean up the lines, only if needed.
Fingerprint
The fingerprint.
Take it at home, with the kit we send you at no cost. There is nothing to send when you order.
How it works
- Receive the kit Ink pad, card and instructions, in 1–2 business days.
- Take and photograph Several prints, in good light.
- Send us the photograph To help@madebyengram.com.
- We engrave and ship In 6–10 business days, once the photograph arrives.
The essentials
- Kit
- Included, at no cost
- Total time
- 2–3 weeks
- Engraving starts
- When the photograph arrives
- For a date
- Tell us in the letter message
You send nothing when ordering: the fingerprint is taken afterwards, at home, with the kit we send you at no cost.
-
Choose the form
While personalising, tap “Fingerprint” and then “Continue”. You can go back and choose another form whenever you like.
-
See what you receive
The next step shows the kit (ink pad, card and instructions) and the four stages, with the lead time of each. There is nothing to upload.
-
Review and order
At the end you see the kit included and when it arrives. Once you have it, take the prints, photograph them in good light and send us the photograph.
Fingerprint
Fingerprint Necklace
Your print, in silver.
You take the print at home, with the wax kit we send you at no cost. From the mould, we cast the piece in S925 silver: it is not engraved, it takes shape from every line of your finger.
How it works
- Receive the kitin 7–12 business days
- Take the printin the wax mould
- Send us the mouldin the kit’s bag
- We make and shipin 8–10 business days
What comes in the kit
- Moulds
- Three, in wax
- Candle
- To soften the wax
- Return
- Bag and label included
- Instructions
- This guide, inside the box
The piece
- Piece
- Fingerprint Necklace
- Metal
- S925 silver · gold-plated on the gold version
- Prints
- One or two, side by side
- Lead time
- 3–4 weeks in all
Step by step
- Warm the wax Bring it carefully near the flame, on a flat, heat-resistant surface.
- Let it soften No need to melt it: it only needs to be pliable.
- Press your finger One firm, centred print, without sliding. With two prints, side by side on the same face.
- Check the result Let it cool and check the lines are well defined. If they are not, use another mould.
- Send us the mould In the bag, with the kit’s return label: drop it off at a point of the carrier named on the label. Making begins when it arrives.
Work with clean, dry hands, keep the candle away from children and let the mould harden completely before sealing it in the bag. Both prints must sit side by side, on the same face of the mould.
You send nothing when ordering: the fingerprint is taken afterwards, at home, with the wax kit we send you at no cost.
-
Choose the fingerprints
While personalising, choose one fingerprint or two, side by side on the piece. The collection kit is already included, at no cost.
-
Read the collection guide
“How to take the print?” opens the step-by-step guide, with what comes in the kit. The same guide travels inside the box.
-
Review and order
At the end you see the kit included, when it arrives and the stages up to the piece. Making begins when the mould reaches the atelier.
Timelines
Made in days. Shipped with tracking.
Each product page shows the estimated date for your piece, before you add it to the cart.
| Piece | Made in |
|---|---|
| Microphotography | 6–10 business days |
| Engraving · Star map | 6–10 business days |
| Fingerprint from a mould | 3–4 weeks in total |
| Engraved fingerprint | 2–3 weeks in total |
| Ready to ship (chains, extras) | 1–3 business days including delivery (PT) |
| Priority production (+€6.00) | 2–3 business days including delivery (PT) |
| Then, shipping | With tracking |
| Mainland Portugal | 1–2 business days · free over €60 |
| Azores · Madeira | 3–7 business days |
| Spain · France · EU | 3–5 business days |
| United Kingdom | 3–6 business days · duties included |
To arrive before Christmas, order your personalised piece by December 12. With a fingerprint, the kit has to travel to you and back to the atelier: order by November 21.
What we promise
-
If it is not right, we make it again.
Personalised pieces are made once, for you. If yours is not as you asked, we make it again at no cost.
-
5-year warranty.
Stainless steel with PVD gold plating, five years. S925 silver, two. Water resistant, made for every day.
-
Ready to give.
The box is always included and never shows the price. Gift bag and handwritten card, as extras.
Questions
The questions we hear most.
Can I see the piece before it is made?
With the microphotograph you see your photo in the window of the piece and, with engraving, the text in the lettering you chose, while you personalise. With the star map, the sky appears traced as soon as you choose the place and the date, the drawing only; to see the final image before we engrave it, add the Design Review from the extras (€3.90) and we send it to you by email.
What if my photo does not work?
We look at every photo before reducing it. If it will not turn out well on the piece, we write to you before making it, with what you can change or asking for another photo. Nothing enters the atelier unless it is right.
Can I change my mind after ordering?
Yes, in the first 24 hours after ordering: write to us and we change the personalisation or cancel the order. After that we can no longer guarantee it, because personalised pieces usually go straight into production. If yours does not arrive as you asked, we make it again at no cost.
Do you ship outside Portugal?
Yes. To the Azores and Madeira in 3–7 business days; to Spain, France and the rest of the European Union in 3–5 business days; to the United Kingdom in 3–6 business days, with duties included. All shipments are tracked.
How do I care for the piece?
It is water resistant and made to be worn every day. To make it last longer, avoid perfumes and creams directly on the metal, clean it with a soft, dry cloth and keep it in its box when you are not wearing it.
Or start with the Still Collection